Cablevey Quotation Form

Download a printable version of this form (Adobe Acrobat Reader required)

Industrial Conveyor Application Data Sheet

To receive a quotation from our application department please furnish
us with all the information requested below.

* Required fields

Company		Date
Contact		Phone
Address		Fax
City/State/Zip		Email
Country		Installation Site
Manufacturing Rep Firm

Application Specifications

1. Product to be conveyed
	Will you convey other products in this system? Yes No If yes, please list additional products to be conveyed.
2. Bulk density of product	min. max. Range
	lbs. per cubic ft.
	kg. per cubic ft.
	kg. per cubic meter
3. Particle Size	Very fine - 100 mesh and under
	Fine - 1/8 in. (3.17 mm) mesh and under
	Granular - 1/2 in. (12.69 mm) mesh and under
	Lumpy - contains lumps over 1/2 in. (13 mm)
	Irregular, fibrous, stringy, other

4. Major product characteristics	Pellet	Hygroscopic
	Granular	Explosive
Check all	Flake	Toxic
that apply	Corrosive	Friable
	Packs or smears easily
	Aerates and becomes fluid
	Exhibits degradation problems

5. Moisture content	0%-5%
	5%-10%
Check one	10%-20%
	20%-30%
	30% and over
6. Temperature of product	F C Ambient
7. Flowability of product	Very free flow - angle of repose up to 30°
Check one	Free flowing - angle of repose 30° to 45°
	Sluggish - angle of repose 45° and up
8. Abrasiveness	Non-Abrasive
Check one	Mildly Abrasive
	Highly Abrasive
9. Maximum Required Capacity or minimum required capacity
	Cubic Feet Per Hour
Check one	Cubic Meters Per Hour
	Pounds Per Hour
	Pounds Per Minute
	Kilograms Per Hour
	Kilograms Per Minute
10. Transfer operation is	Continuous
	Intermittent
	Batching
Estimated hours per week
Estimated hours per day
11. Product to be fed to conveyor by	Silo
	Screw Conveyor
	Belt Conveyor
Check one	Vibratory Conveyor
	Bulk bag unloader
	Dump Hopper
	Other
12. Construction specifications
Standard:	304 Stainless Drive Frames (on 4") 304 Stainless Turnaround Frames (on 4") Stainless Steel Tubing Stainless Steel Sweeps Galvanized Compression Couplers Galvanized Cable Galvanized Tubing Stainless Steel Discharge Stainless Steel Inlet
Stainless Contacts:	304 Stainless Drive Frames (on 4") 304 Stainless Turnaround Frames (on 4") Stainless Steel Tubing Stainless Steel Sweeps Galvanized Compression Couplers Stainless Steel Discharge Stainless Steel Inlet
All Stainless:	304 Stainless Drive Frames (on 4") 304 Stainless Turnaround Frames (on 4") Stainless Steel Tubing Stainless Steel Sweeps Stainless Steel Compression Couplers Stainless Steel Discharge Stainless Steel Shafts (on 4") Stainless Steel Drive Wheels (on 4") Stainless Steel Springs and Internal Ports on Turnaround (on 4") Stainless Steel Inlet Stainless Steel Cable

13. Motor Specifications	Voltage	3 Phase	Single Phase	Frequency
		230 V	120 V	50 Hertz
Check Voltage and Frequency		330 V	240 V	60 Hertz
		380 V
		460 V
		575 V
Please check all that apply	T.E.F.C.		Explosion
	Wash down duty		Other
	*Hazardous area classification (if applicable)
	Class I II
	Group C D E F G
	Division 1 2

14. System Layout	Sample number SEE OPTIONS
	Measurements in feet meters
	horizontal:
	vertical:
	horizontal:
	Blue print or Drawing Included
	(Only JPG, GIF, PNG, PDF, and DWG 10MB or smaller will be accepted. If your file is larger than 10MB, please contact Cablevey)
15. Number of Inlets
16. Number of Discharge Points
17. Quotation needed by
18. Quotation is to be	Formal Proposal
Check one	Budgetary Number
	Ball Park Pricing
19. Special notes regarding system
20. Installation Date
21. Order Date
22. How did you find out about our site?	Keywords used Please enter keywords here Please Specify Please Specify

SPECIAL NOTE: Quotation is based on completed Industrial Proposal Information Sheet, blueprints or drawings, and sample of materials(s) used for testing. Our proposal/budgetary is based upon the information as submitted. Any deviation from this initial information will deem the proceeding proposal/budgetary null and void. Any changes and/or alterations that may exist at the time of installation of equipment will result in additional costs over and above original quotation. DRAWINGS need to be sent as attachments via email.

Materials Conveyed

Conveyor System Layouts

Component Identification

Newsletter Sign up

Articles

Almond company chooses gentle,
clean conveying

Click for more...

Mobile Exhibit

Cablevey News

Search & Translate