|
 |
|
FLOOR STAND TUBE SUPPORT:
C00144
C00144S |
| |
Function:
The Floor Stand Tube Support is used with the 180° Direct Drive Unit and the 180° Turnaround Unit. The tube support assembly uses U-bolts to clamp the parallel conveyor tubes a set distance apart and to support them from the floor or a base pad.
|
|
 |
SUSPENDED TUBE SUPPORT:
C00145
C00145SS |
|
Function:
The Suspended Tube Support is used with the 180º Direct Drive and 180º Turnaround Units. The tube support assembly uses U-bolts to clamp the parallel conveyor tubes a set distance apart. The support assembly is to be used on conveyor tubes positioned horizontally, vertically or at any angle in between and suspends them with cables or threaded rods.
Back to Top^
|
TEARDROP HANGER:
C00154
140068SS (stainless) |
|
|
Function:
The steel teardrop hanger supports th 4 in. (10.16 cm) steel tubing. The tube hanger may be suspended from a chain, cable or threaded rod and the tube is free to slide within the tube hanger for conveyor positioning
Back to Top^ |
|
FULL CIRCLE U-BOLT:
140059
140059S |
|
Function:
The Full Circle U-bolt attaches to the 4 in. (10.16 cm) steel sweep corner and may be suspended from a chain, cable or threaded rod.
Back to Top^ |
|
|
|
|
