|
 |
|
45° PNEUMATIC SLIDE GATE VALVE:
STAINLESS STEEL
C00178SS |
|
Function:
The 45° Pneumatic Slide Gate Valve is a shut off and metering device. This valve controls the product flow from the bulk source to the Gravity Inlet and system. The 45° Slide Gate is pneumatically opened and closed. Adjustable stops set the gate’s open position, regulating the product flow into the system. The 45° shut off gate eliminates flat surfaces and allows complete product discharge. The Slide Gate Valve assembly is bolted on top of the Gravity Fill Inlet (C00136SSA) and is positioned over the side the discs enter. This allows the product to fall onto the moving cable and discs and settle to the bottom before exiting the Gravity Fill Inlet. Product is then gently conveyed from the Gravity Fill Inlet into the closed tubing without product damage or excessive pull on the cable.
|
| Dimensions: |
Hole Pattern |
 |
Front View |
 |
Side View |
 |
|
|
|
 |
INLET ADAPTOR VALVE GATE:
STAINLESS STEEL
C00175SS |
|
Function:
The Inlet Adaptor Valve Gate controls the product flow rate from the bulk source into the Cablevey system. Two stainless steel plates pivot to increase or decrease the opening through which product may fall. The two plates attach to exterior handles which may be independently adjusted and locked to maintain the desired flow rate.
The Valve Gate assembly is bolted on top and to one side of the Gravity Fill Inlet (C00146SSA). Since the Valve Gate assembly is not centered on top of the Gravity Fill Inlet, product to be conveyed falls onto the moving cable/discs and settles to the bottom of the inlet. Product is then gently conveyed from the inlet into closed tubing without product damage or excessive pull on the cable..
|
| Dimensions: |
Top View |
 |
Front View |
 |
Side View |
 |
|
|
|
|
|
